Publicidad
Idiomas disponibles
Idiomas disponibles
ASSEMBLY AND ADJUSTMENT INSTRUCTIONS FOR 1P50 - R
CONNECTION WITH OTHER PROSTHETIC MODULES :
Connection in upper part with any Proteor standard module for knee linking, and in lower part with any
SACH or DYNASTEP foot from PROTEOR range.
USE :
For patients up to 100 kg, and for any activity level.
I : PACK CONTENTS
(See figure I)
A
Carbon frame
Hydraulic unit
B
C
Rod
D
Upper joint
E
Lower joint
F
Hexagonal hollow screw
with cylindrical head (x 4)
G
Spacers (x 4)
G1 Plain washer
G2 Spring Grower
H1 Hexagonal hollow screw
with cylindrical head
M10x30
H2 Hexagonal hollow screw
with cylindrical head
M10x45
H3 Hexagonal hollow screw
with cylindrical head
M10x60
CAUTION :
1) When cutting and assembling, never modify the position of the green knob of the hydraulic unit.
2) The cutting block ref. 1 P 5070 must IMPERATIVELY be used for adjusting the length of the frame
and that of the rod. PROTEOR cannot be held liable if the Hydracadence frame
is incorrectly cut.
II : CHECK THE SCREW FITTINGS FOR THE FOOT
(See figures 2, 3 and 4)
Feet references 1A21 and 1A118 :
- Spring Grower G2
-Screw H2 (M10x45)
D
Z1
H3
Z2
Z
Z3
A
H2
H1
G1
F
G2
G
E
1P5099-R-09/04
Page 7/21
Fig. 1
B
CAUTION
Always mount the nut
with its conical side
near the cylinder rod.
C
CAUTION
Always mount the nut
with its conical side
downwards.
Fig. 2
15 maxi
10 mini
Publicidad
