Gas Connection (Only Gas Models) - Fagor C A-0623-E Manual De Instalación

3. Installation instructions

3.7 Gas connection (only gas models)

The gas connection can only be carried out by an approved gas installer.
Maximum consumption at rated thermal load:
Dynamic
pressure
Type of gas
required
(mbar)
G-20 Natural
20
(m³/h) Gas
G-30
28-30
Butane
(kg/h)
G-31
37
Propane
(kg/h)
The air required for combustion is 2 m
Observations:
•
Observe the regulations of the gas supply company.
•
Observe the installation instructions.
•
Check that the gas indicated on the appliance is identical to that supplied.
•
A pipe with a minimum diameter of Ø12x10mm and a
the gas to the equipment.
•
The gas shut-off tap is located on the front of each appliance.
>
Minimum Maximum
Models
pressure pressure
061
(mbar) (mbar)
17 25 1.270
25 35 0.998
42.5 57.5 0.984
3 /h per kW of power.
It is essential that the gas supply
pipes and connections to the
corresponding gas meters have
the indicated ø.
After connecting the equipment,
ensure that there are no leaks
using a gas detector (spray etc.).
NEVER use a flame to check for
leaks.
Models Models Models
101 201 102
1.905 3.809 3.704
1.498 2.995 2.912
1.476 2.951 2.869
¾
" nut must be used for connecting
Models
202
6.878
5.408
5.329
14