Knobs can no
There is dirt
longer be
under knobs
turned easily.
Fan does not work all the time in
the mode: "Fan Heating"
After a cooking process a noise
can be heard and a air flow in the
near of the control panel can be
observed.
in the time given by the recipe .
Uneven browning
The lamp doesn't turn on
Warning
-Risk of electric shock!
Incorrect repairs are dangerous. Repairs may only be carried out and damaged power
cables replaced by one of our trained after-sales technicians. If the appliance is defec-
box. Contact the after-sales service.
Knobs can be removed.
To disengage knobs, simply remove them from the
support.
Alternatively, press on the outer edge of knobs so
that they tip and can be picked up easily.
Carefully clean the knobs using a cloth and soapy water.
Dry with a soft cloth.
Do not use any sharp or abrasive materials.
Do not soak or clean in the dishwasher.
Do not remove knobs too often so that the support
remains stable
This is a normal operation due to the best possible heat
distribution and best possible performance of the oven.
The cooling fan is still working, to prevent high
moisture conditions in the cavity and cool down the
oven for your convenience. The cooling fan will
check the temperatures. The ingredient quantities are
The temperature setting is too high, or the shelf level
could be optimized. Double check the recipe and settings.
The surface finish and or color and or material of the
baking ware were not the best choice for the select -
ed oven function. When use radiant heat, such as
"Top & Bottom Heating" mode, use matt finished,
dark colored and light weighted oven ware.
The lamp needs to be replaced.
English-23