BEFORE USING THE APPLIANCE
First using for the first time
Before using the appliance to prepare food for the first time, you must clean the
cavity and accessories.
1.
Remove all stickers, surface protection foils and transport protection parts.
2.
Remove all accessories and the side-racks from the cavity.
3.
Clean the accessories and the side-racks thoroughly using soapy water and a dish
cloth or soft brush.
4.
Ensure that the cavity does not contain any leftover packaging, such as polystyrene
pellets or wooden piece which may cause risk of fire.
5.
Wipe the smooth surfaces in the cavity and the door with a soft, wet cloth.
6.
To remove the new-appliance smell, heat up the appliance when empty and with the
oven door closed.
7.
Keep the kitchen highly ventilated while the appliance is heating up first time. Keep
children and pets out of the kitchen during this time. Close the door to the adjacent
rooms.
8.
Adjust the settings indicated. You can find out how to set the heating type and the
temperature in the next section.
→"Using Your Appliance" on page 9
Settings
Heating Mode
Temperature
Time
After the appliance has cooled down:
1.
Clean the smooth surfaces and the door with soapy water and a dish cloth.
2.
Dry all surfaces
3.
Install the side-racks
Setting the time
Before the oven can be used, the time should be set.
After the oven has been electrically connected, touch the clock symbol then you can
1.
set time of day in hours by turn right knob.
Touch clock symbol again then you can set time in minutes by right knob.
2.
Touch clock symbol to finish the setting.
3.
NOTE: The clock has a 24 hour display.
250°C
1h
English-6