Search Function; Cd Search And Repeat - Sangean DMS-37BT Manual De Instrucciones

Select a desired track
. For track numbers -9 simply press the corresponding digit button. For track numbers ten and
above press the required digits using the 10/0 button to enter the digit zero.
2. If the track number entered exceeds the number of tracks on the CD, then the last track on the
CD will be played.

Search function

. While the CD is playing, press and hold the Fast-forward or Rewind buttons. Release the button
when the desired part of the track is reached.
Repeat a single track
2. While the CD is playing, press the Repeat button until the repeat single track symbol (
appears in the display. The current track will be repeated.
Repeat all tracks
3. While the CD is playing, press the Repeat button until the repeat all tracks symbol (
in the display. All of the tracks on the CD will be played repeatedly.
Play tracks introduction
4. While the CD is playing, press the Repeat button until the track introduction symbol (
appears in the display. The first 0 seconds of each track will be played. When the desired
track is reached, press the Repeat button once more to revert to normal play mode.
Play tracks in random order
5. While the CD is playing, press the Random button until the random symbol (
the display. The tracks will be played in random order. To cancel the random playback function,
press the Random button a second time.
25
)
) appears
)
) appears in