Headphone Socket; Aerial Removal - Sangean DMS-37BT Manual De Instrucciones

Headphone socket

GB
A 3.5mm stereo Headphone Socket is provided on the rear of your sound system for use with
headphones. Inserting a plug automatically mutes the internal loudspeakers.
IMPORTANT:
Excessive sound pressure from earphones and headphones can cause hearing loss.

Aerial removal

The fitted telescopic aerial is suitable for most applications. In some locations if reception
conditions are poor, an external antenna may be more suitable. For this purpose the telescopic
aerial may be removed to allow connection to an external aerial using a coaxial cable.
First remove the two small screws holding the antenna connector cover in place using a small
cross-head screw driver. Then using a suitable spanner (mm across the flats), remove the
telescopic aerial by rotating in an anti-clockwise direction when viewed from the rear of the
product.
This will expose an F-type connector to which a coaxial cable may then be connected.
50