Cd Track Programming - Sangean DMS-37BT Manual De Instrucciones

CD track programming

In addition to playing of complete CDs, selected tracks, or a random selection, the CD player allows
you to programme a sequence of up to 20 tracks to be played in whatever order you choose.
. With the unit in CD mode and with a CD inserted, make sure that the CD is stopped (press the
Stop / Select button).
2. To enter programming mode, press the Menu button.
3. Choose the first track using the Fast-forward or Rewind buttons.
4. Press the Menu button to enter the selected track into the programme.
5. Choose another track using the Fast-forward or Rewind buttons, and enter it into the programme
using the Menu button (track 6 in example shown).
6. Repeat step 5 to store as many as 20 tracks in the programme.
7. When the programme is complete, press the Play / Pause button to start playing. The tracks
will then be played in the order that you have just programmed.
8. Pressing the Stop / Select button, or switching to another operating mode will erase the programme.
Note:
If you are programming the tracks using a CD with MP3 or WMA files in folders (see the following
pages), you can also use the Up or Down Folder buttons to specify the folder in steps 3 and 5 above.
GB
26