Jolly Mec J20 Ficha De Montaje, Uso Y Mantenimiento página 54

Ocultar thumbs Ver también para J20:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 154
Instructions for safe and efficient use
• The device can be used by children that are not
less than 8 years old and people with reduced
physical, sensory or mental capabilities, or lack
of experience or knowledge, provided being
under supervision of someone responsible
or after having received instructions relating
to the safe use of the device and to the
understanding of the dangers inherent to
it. Children should not play with the device.
Cleaning and maintenance to be performed
by the user should not be made by children
without supervision;
• Do not use the boiler as a ladder or scaffold;
• Do not put clothes to dry on the boiler;
• Any clothes hangers and suchlike must be kept
a suitable distance from the boiler. - Risk of fire;
• Carefully explain that the boiler is made from
material subjected to high temperatures for
the elderly, the disabled, and in particular for
all children, keeping them away from the boiler
during operation;
• Do not touch the boiler with wet hands: the
boiler has electrical components that could
produce sparks if handled incorrectly;
• Never open the glass door of the pellet boiler
while the boiler is in operation;
• The boiler must be connected to an electrical
system equipped with an earthing conductor in
accordance with regulations 73/23 and 93/98
EEC;
• The system must be of adequate electrical
power declared the boiler;
• Do not wash the inside of the boiler with water.
• The water could damage the electrical
insulation, causing electric shock;
• Do not expose your body to hot air for a long time.
Do not overheat the room you are in and where
the boiler is installed. This can damage the
physical conditions and cause health problems;
• Do not expose to direct the flow of hot air
plants or animals;
The boiler is equipped with a safety device to prevent operation with dangerous
negative pressure in the combustion chamber caused for example by unfavourable
climatic situations or blockages in the flue. If intervening on this device, do not
tamper with it and wait for the climatic situation to allow the flue to return to
a negative pressure that would guarantee correct operation of the boiler. If the boiler is
installed in particularly windy situations for long periods of time which would prevent
daily use of the boiler, the smoke extractor speed can be increased to guarantee correct
negative pressure in the combustion chamber.
4
• The pellet boiler is not a cooking element;
• External surfaces during operation can become
very hot. Do not touch them except with the
appropriate protection;
• The plug of the device power cable must be
connected only after installation and assembly
of the device and must remain accessible after
installation, if the unit is not provided of a
double-pole switch suitable and accessible.
• Pay attention that the power cord (and any
other cables external to the appliance) do not
touch hot parts.
• Do not lay objects, glasses, infusers, room
perfumers on the boiler, they could be
damaged or to damage the boiler (in this case
de warranty does not respond).
• In the event of a start-up system, do not force
switch on;
• Unburnt pellet accumulation in the burner
following "no switch on" must be removed
before proceeding with new switch on. Before
each restart, ensure the grate is well positioned
and clean;
• It is forbidden to manually load the fuel in the
grate. Non-compliance with this warning can
generate dangerous situations;
• Evaluate the static conditions of the surface on
which the weight of the product gravitates;
• Extraordinary maintenance operations must be
carried out by Specialised Technical Assistance
Centre only;
• Disconnect the electrical power supply of the
product before carrying out any maintenance
operation;
• On first start-up, smoke may generate due to
initial heating of the paint. Keep the premises
well ventilated.

Publicidad

Tabla de contenido
loading

Productos relacionados para Jolly Mec J20

Este manual también es adecuado para:

J25J30J35

Tabla de contenido