Technical Data - Gardena ProCut 800 Manual De Instrucciones

8851-20.960.02_12.11.2008:GARDENA
1
Fault
The Turbotrimmer
no longer cuts
In the event of other faults please contact GARDENA Service.
A Repairs should only be carried out by GARDENA service centres or dealers
authorised by GARDENA.

8. Technical Data

Turbotrimmer
Motor power consumption
Mains voltage /
mains frequency
Filament thickness
Cutting width
Filament supply
Filament feed
Weight
Rpm of filament cassette
Work area related emission
characteristic value L
Noise level L 2)
WA
Hand / arm vibration a
Measuring method according to 1) EN 786 2) directive 2000 /14 / EC
27.11.2008
All manuals and user guides at all-guides.com
3. Unwind the cutting filament
1
and the cutting filament
onto the cassette
4. Insert the filament cassette again as described under
6. Maintenance "Replacing the filament cassette" .
O
Note :
The cassette cover
the filament manually.
Possible cause
Filament cassette empty.
Blade cover not removed.
Tap mechanism doesn't work
because the filament has
disappeared into the cassette
or fused.
ProCut 800 (Art. 8851)
800 W
230 V / 50 Hz
2 mm
350 mm
2 x 3 m
Tap mechanism
5.0 kg
12,000 rpm
85 dB (A)
1)
pA
measured 94 dB (A) /
guaranteed 96 dB (A)
1) < 2.5 m / s 2
vhw
16:26 Seite 17
1
, clean the filament cassette
1
and wind the cutting filament
O
once more.
N
can also be pressed by hand to lengthen
Remedy
v Replace the filament cassette
(see 6. Maintenance
"Replacing the filament
cassette" ).
v Remove blade cover.
v Remove filament that has
disappeared into the
cassette or fused (see
above).
ProCut 1000 (Art. 8852)
1000 W
230 V / 50 Hz
2 mm
350 mm
2 x 3 m
Tap mechanism
5.7 kg
12,000 rpm
85 dB (A)
measured 94 dB (A) /
guaranteed 96 dB (A)
< 2.5 m / s 2
O
1
17