Adjustments - SPORTSTECH Ergometer X100-C Manual Del Usuario

FOLDING FOR STORAGE:
Carefully remove the ball pin and slide the stabilizers together to fold the device. Re-insert the ball pin
and stow the device securely.
TRANSPORT:
Tilt the device forward until the wheels of the front stabilizers touch the ground while holding the handle-
bars. Slide the device to your desired location and carefully lower the stabilizer to the floor.
Do not increase the height
of the seat post beyond the
MAX level!
The adjustment pin must
be inserted in one of the
pre-drilled seat placements.
Do not use the device if it is
not fully secured through one
of the intended settings.

5. ADJUSTMENTS

RESISTANCE REGULATOR:
Use the adjustment wheel below the display for the
the voltage regulator. To increase tension, turn the
wheel clockwise (+). To decrease the tension, turn
the dial counterclockwise (-).
SEAT HEIGHT ADJUSTMENT:
1. Loosen the seat height adjustment knob
counterclockwise below the seat.
2. Pull the button a little bit away from the seat post
and adjust the height at which you want to position
the seat.
3. Then screw the button again
clockwise so that it is firmly in place.
28
Adjustment
pin