Ducting Options - Yale PWLCL630SS Guía De Instalación, Uso Y Mantenimiento

Ducting Options

Closely follow the instructions set out in this manual.
All responsability, for any eventual inconveniences, damages or fires caused by not complying with the instructions in this manual, is
declined.
Horizontal Discharge
Use a 10" (25.4 cm) round vent system and a 10" (25.4 cm)
round transition for discharge of fumes to the outside.
D
A
B
A. 10" (25.4 cm) round transition
B. 10" (25.4 cm) or 8" (20.3 cm) duct
Preparation
Do not cut a joist or stud unless absolutely necessary. If a joist or
stud must be cut, then a supporting frame must be constructed.
Fittings material is provided to secure the hood to most types of
walls/ceilings.
However, a qualified technician must verify suitability of the
materials in accordance with the type of wall/ceiling.
Before making cutouts, make sure there is proper clearance
within the ceiling or wall for exhaust vent.
I
CAUTION
For gas cooktop & range installations: Mount the hood so the
bottom is at least 30" (76.2 cm) above the cooking surface.
C
B
A
C. Cabinet
D. 90° elbow
Vertical Discharge
Use a 10" (25.4 cm) round vent system and a 10" (25.4 cm)
round transition for discharge of fumes to the outside.
C
B
A
A. 10" (25.4 cm) round transition
B. 10" (25.4 cm) or 8" (20.3 cm) duct
C. Cabinet
For electric/induction cooktop & range installations: Mount the
hood so the bottom is at least 24" (61 cm) above the cooking
surface.
There is no maximum mounting height, however, we recommend
mounting the hood no greater than 36" (91.4 cm) above the
cooking surface. For every inch (2.54 cm) above 36" (91.4 cm),
fume and moisture capture efficiency diminishes at an increa-
sing rate and may not deliver an acceptable level of ventilating
performance.
This hood is intended for household use.
PLEASE READ THE INSTALLATION MANUAL FOR SPECIFIC
APPLICATION. Check your ceiling height and hood height
before selecting your hood.
7