Installing The Humidifier - Honeywell Home HE360 Serie Manual De Instrucciones

HE360 HUMIDIFIER
Locating Closest 120 V Electrical Outlet
• Select location with access to an outlet. If not available, contact an electrician to have one installed.
• Make sure that the humidifier cord is adequate to reach from the humidifier to the outlet.
• Make sure that the thermostat wire is adequate to reach from the humidifier solenoid, to the pressure switch,
to the humidistat.

Installing the Humidifier

WARNING
Hazardous Voltage
Can cause personal injury or equipment damage.
Do not cut or drill into any air conditioning or electrical accessory.
CAUTION
Sharp Edges Installation Hazard.
Can cause personal injury.
Wear gloves and safety glasses.
1. Turn off power to the air handing system at the circuit breaker.
2. Draw a level line on the plenum in the location
chosen for the humidifier. (Leveling assures optimal humidifier performance.)
3. Locate the template (form number 69-2641 included in the box).
4. Tape the template in position and trace around the template.
5. Remove the template and carefully cut the rectangular opening.
6. Disassemble the humidifier; remove the cover and take out the humidifier pad assembly. See Fig. 3.
69-2631ES—13
ALTERNATE
LOCATION
RETURN
AIR
6 IN (152 MM)
MINIMUM
BEST
LOCATION
RETURN
AIR DUCT
Fig. 2. Selecting duct location for humidistat.
RETURN
AIR
15 IN (381 MM)
MINIMUM
M34579B
4