Installing The Humidistat - Honeywell Home HE360 Serie Manual De Instrucciones

Installing the Humidistat

1. Separate wallplate from humidistat.
CAUTION
Electrical Hazard
Can cause electrical shock or equipment damage. Disconnect power before beginning installation.
2. Mark the duct-tube hole. Hold the wallplate up to the desired location on the duct and make a mark inside
the duct tube hole.
3. Drill the duct-tube hole. Find your mark and drill a 1/2 in. hole in the duct. This is where the duct tube will
be inserted to capture air.
PULL HERE
Replace Batt Replace Batt
Inside
Setting
%
%
HUMIDITY BOOST
Light
System
Next Auto
M34565A
Fig. 10.
M34580A
Fig. 11.
M34581C
Fig. 12.
9
HE360 HUMIDIFIER
69-2631ES—13