Fitting The Castors To The Base Frame - Rohde AB100 Instrucciones De Uso

5.3.

Fitting the castors to the base frame

Step Description
1 Position the base frame (Item 2) so that the
4 threaded holes point upwards.
⇒ If necessary, carry out the work steps with
a second person.
⇒ Cover the floor if necessary to avoid
damage.
2 Screw the 4 castors (Item 3) into the base frame.
3 When tightening the castors:
Hold the hexagonal bolt with a 12 mm open-end
spanner.
4 As soon as the castors have been mounted, you
can turn the base around again and place it on
the castors.
⇒ If necessary, carry out the work steps with
a second person.
22 / 112 - EN -
Illustration