Fitting The Trap To The Sedimentation Tank - Rohde AB100 Instrucciones De Uso

5.5.

Fitting the trap to the sedimentation tank

Step Description
1 Remove the trap (Item 4) from the accessories
supplied and unscrew the inlet strainer with a
slotted screwdriver.
2 Remove the inlet strainer and seal from the trap.
3 Position the trap (Item 4) at the hole (Ø = 50 mm)
on the outside of the three-compartment tank
(Item 1).
4 Place the inlet strainer together with the seal on
the hole in the three-compartment tank.
5 Screw the inlet strainer to the seal and the trap.
24 / 112 - EN -
Illustration