TOKIT Omni Cook Manual De Instrucciones De Uso página 10

CAUTION
When mounting the mixing blade set, make sure the sealing ring properly fits the drive shaft.
Make sure the sealing ring is intact. If the sealing ring is damaged, the main engine frame could
be damaged as a result of liquid leaking in.
Before cooking, ensure that the mixing blade set is properly mounted and securely locked.
2.3.3 Mixing bowl lid
The Mixing bowl lid is used to seal the Mixing bowl. For your safety, please only start the Omni
Cook when the mixing bowl lid has been properly placed and locked. Please follow the
procedures below:
CAUTION
For your safety and better cooking experience, please read the following contents:
Never force to open the mixing bowl lid, for this may damage the lock on the mixing bowl.
To guard against scalding caused by splashing of hot food materials, do not open the mixing
bowl lid during cooking.
Be careful when opening the mixing bowl lid at the end of cooking, since the mixing bowl may
contain residual high-temperature steam that could cause scalding.
Please regularly check the sealing ring of the mixing bowl lid for any signs of damage.
08
Lock up clockwise
1 Place the mixing bowl lid on the mixing bowl, push
it down with both hands to ensure a secure fit of
the mixing bowl lid with the mixing bowl.
2
Turn the handle of the mixing bowl lid clockwise to
lock the mixing bowl lid and the mixing bowl
handle until you hear a click.
3
Please ensure that the mixing bowl lid is locked
with the mixing bowl handle. The locking of the
mixing bowl lid and the mixing bowl rim needs to
be secure and free of tilting.
4
When you want to remove the mixing bowl lid, turn
the handle of the mixing bowl lid counterclockwise
to unlock the mixing bowl lid, then, lift the mixing
bowl lid by gripping its handle.