Instructions For The Use Of Parts - TOKIT Omni Cook Manual De Instrucciones De Uso

2.3

Instructions for the use of parts

2.3.1 Mixing bowl
Use the Mixing bowl to process or cook food materials. It consists of a stainless-steel container, a
mixing bowl lid, and a blade set. The Omni Cook can only be started for cooking after the mixing
bowl has been properly placed in the main engine frame. Please follow the procedures below:
2.3.2 Mixing blade set
Please disassemble the mixing blade set separately for cleaning and drying before cleaning the
mixing blade set and mixing bowl,and then assemble it properly for next use. The mixing blade set
is used for stirring/shredding/mixing/grinding food. It must be properly assembled and locked
securely with the lock ring, otherwise, accidental injury may be caused. Please follow the
procedures below:
06
Push the safety lock leftwards
1
Align the mixing bowl vertically with the dock of
the main engine frame, with the handle facing
towards the front.Press the mixing bowl down-
wards until a click is heard, which confirms that the
mixing bowl has been completely locked to the
main engine frame.
2
To dismount the mixing bowl, push the safety lock
leftwards while lifting the mixing bowl.
CAUTION
For your safety and a better cooking experience,
please read the following contents carefully:
Place the Omni Cook on a clean, flat, and steady
surface.
Avoid placing the Omni Cook close to the edge,
otherwise, it may drop due to possible move-
ment or collision during its operation.
Do not place it on cooking stoves (high-tempera-
ture area, ceramic cooktop, induction cooker, etc.)
or on a hot or heated surface, but keep it away
from any fire sources.
Do not place it under any furniture (rack,
cupboard, etc.) since the steam generated during
food processing may damage the furniture.