Quick Start Guide; First Start; Start And Shutdown; Initial Configuration - TOKIT Omni Cook Manual De Instrucciones De Uso

03

QUICK START GUIDE

3.1

First start

Insert the power plug into AC socket. switch the Omni Cook on, and the display panel will display
the launch screen.
3.2

Start and shutdown

Startup: Connect the Omni Cook to power source, and the display panel will automatically display
the splash screen;
Shutdown: Press and hold the ON/OFF button until a shutdown prompt appears; click CONFIRM on
the screen to shut down the device.
Reminder:
1.By default, after 10 minutes of idle state, the display panel of the device will go off and automati-
cally enter the SLEEP mode.
2.Screen wake-up mode: Click the "ON/OFF" button to wake up the screen in the sleep state.
3.3

Initial configuration

During the initial startup, the device will display the Welcome page. Please follow the instructions
on that page to complete the initial configuration, by simply following the instructions displayed
on the screen. During its operation, turn the control knob to proceed to the next step, once the
configuration is completed, you will access to the homepage.
You can modify the configuration later by changing the configurations on the [SETTING] menu.
Wi-Fi connection:select the correct Wi-Fi connection,enter the password, and then press
"CONNECT" to start connection. You can find the Wi-Fi function in the [SETTING] menu.
3.4

Emergency stop

12
When an unexpected emergency situation occurs
during the device is in operation, you may stop the
device immediately by pressing the ON/OFF button
at the right side of the main engine frame. Or you
may suspend current cooking progress by pressing
the control knob, and press the control knob again to
resume previous cooking program.