Prepare The Installation Of The Charger; Fit The Upper Screw - Ingeteam NEO Manual De Instalación

Installation

3.1.7. Prepare the installation of the charger

1. Mark the holes to be made.
2. Drill the holes.
3. Fit the wall plugs.

3.1.8. Fit the upper screw

Fit the screw of the upper part and tighten it until it stops on the bushing.
CAUTION
In the case of the STAND, use the screws that come with it in the packaging.
ABV2013IQM01_ - Installation manual
1
2
3
Wall mounting: 4.8x38 screw
STAND assembly: M5x12 screw
Ingeteam
EN
ES
FR
IT
8 mm
11