Install Charging Cable Bracket; Supply Power To The Charger; Sim Card Installation - Ingeteam NEO Manual De Instalación

Ingeteam

3.1.15. Install charging cable bracket

1. Mark the holes to drill in the wall.
2. Drill the holes.
3. Fit the wall plugs.
4. Place the screws.

3.1.16. Supply power to the charger

Close the cut-off element of the electrical circuit that powers the charger.

3.2. SIM card installation

1. Remove the 6 screws that join the front cover to the rear cover using a Torx head screwdriver, size T20.
Remove the frontal cover.
14
1
2
3
ABV2013IQM01_ - Installation manual
Installation
8 mm