Bellman & Symfon BE1431 Manual De Instrucciones página 20

Installation
1 Remove the battery pull tab to start the unit. Clean the wall with the wet wipe
and remove the protective film from the Velcro.
2 Mount the transmitter on the wall. You can also use the supplied screw and plug.
3
Connect the telephone splitter between the telephone plugs and the socket.
1
38
2
3
Testing
1 Use your mobile phone or ask a friend to call your landline telephone.
2
The yellow Visit LED on the receiver lights up and it starts to sound, flash or
vibrate, depending on the receiver. If it doesn't react, read Troubleshooting.
1
EN
2
39