Thoroughly Cleaning The Grinding Blades; Shutting Down The Grinder-Doser; Replacing The Grinding Blades; Supplementary Maintenance - Fiorenzato F64 E Manual De Instalación, Uso Y Mantenimiento

EN
6.1.3

Thoroughly cleaning the grinding blades

EVERY MONTH: thoroughly clean the grinding blades
The grinding blades should be thoroughly cleaned
once a month (or when necessary), using specifi c
cleaning products for grinder-dosers, which are readily
available on the market (e.g. PULY GRIND coffee
grinder cleaner).
• Thorough cleaning must be carried out after the end-
of-shift cleaning. No coffee must be in the machine
and the supply hopper must not be attached.
• The grinding blades can be cleaned by pouring a
dose of the product into the (completely empty)
grinding chamber and starting the grinding process.
During grinding, the product (in grains or crystals)
regenerates the grinding blades by completely
removing all coffee, scale, mould and greasy
deposits from their surfaces, absorbing oil and
destroying any rancid deposits without leaving any
residues.
• In this way, regeneration takes place without the
need to disassemble the grinding blades and
without having to change the set grinding position.
6.1.4

Shutting down the grinder-doser

If the machine is not used for long periods of time (e.g. festive periods, holidays, etc...),
we recommended carrying out the following cleaning operations to keep it in good
condition and avoid any potential problems when restarting it.
WHEN NECESSARY: cleaning and shutting down the machine.
• The grinder-doser should be thoroughly cleaned as
described in Par. 6.1.1.
• Thoroughly clean the grinding blades as described
in Par. 6.1.3.
• Disconnect the power supply cable from the power
socket.
• Cover the machine with a cloth to prevent any
accumulation of dust and dirt.
38 / 44 EN
ON DEMAND line
Fiorenzato | ON DEMAND_00 line Ed. 03/2022
ON DEMAND line
6.1.5

Replacing the grinding blades

The scheduled deadline for replacing the grinding blades is set by Fiorenzato M.C. S.r.l.
depending on the type of grinders and the grinder-doser model.
At the end of the time set by the manufacturer, the warning icon '
display, indicating that they need to be replaced.
ATTENTION! The grinding blades must be replaced by a qualifi ed operator
or by specialised technicians using original spare parts.

6.2 Supplementary maintenance

There are no scheduled supplementary maintenance operations for the grinder-doser.
However, in the event of breakages and/or malfunctioning not covered in the section
"7 ANOMALIES - CAUSES - REMEDIES", do not intervene on the appliance yourself but
inform your local dealer who will contact the Fiorenzato M.C. S.r.l. service department to
solve the problem.
Fiorenzato | ON DEMAND_00 line Ed. 03/2022
EN
' appears on the
39 / 44 EN