Functions; Configuration - WIKA Obsolete A-AS-1 Manual De Instrucciones

6. Commissioning, operation

6.2 Functions

Overview
Selection of the physical pressure unit
■
Positioning the decimal point
■
Setting the smallest display value
■
GB
Setting the largest display value
■
Setting the switch points for output 1
■
Setting the switch functions for output 1
■
Setting the switch points for output 2
■
Setting the switch function for output 2
■
Input of the zero point offset
■
Key functions
Setting the switching points and switching functions
Change the unit to the left
Change the unit to the right
+
+

6.3 Configuration

Fitting the LED attachable indicator to the pressure transmitter.
Button 1
14
Input of zero point offset
Configuration
Button 2 Button 3
WIKA operating instructions attachable indicator, models A-AS-1, WUR-1
If, during the configuration, no keys are
pressed for 10 seconds, the instrument will
automatically revert to the menu level one
level up. After a further 60 seconds without
any operation of the keys, the instrument
will restart itself. Unsaved changes will
be lost.