Dismounting, Return And Disposal - WIKA Obsolete A-AS-1 Manual De Instrucciones

8. Faults / 9. Dismounting, return and disposal
Error
Err.3
Indication range
exceeded
Err.4
Under the indication
range
CAUTION!
If faults cannot be eliminated by means of the measures listed above,
the LED attachable indicator must be shut down immediately, and it must
be ensured that signal is no longer present, and it must be prevented
from being inadvertently put back into service. In this case, contact the
manufacturer. If a return is needed, follow the instructions given in chapter
9.2 "Return".

9. Dismounting, return and disposal

WARNING!
Residual media in dismounted instruments can result in a risk to persons,
the environment and equipment.
Take sufficient precautionary measures.
9.1 Dismounting
Disconnect the LED attachable indicator from the power supply. For plug connections,
loosen the threaded connection and pull apart.
9.2 Returns
WARNING!
Absolutely observe the following when shipping the instrument:
All instruments delivered to WIKA must be free from any kind of hazardous
substances (acids, leachate, solutions, etc.).
When returning the instrument, use the original packaging or a suitable transport package.
WIKA operating instructions attachable indicator, models A-AS-1, WUR-1
Causes
Scaling incorrect
■
Scaling incorrect
■
Measures
The error message will be reset
■
once the display value is once
more < 9999.
The error message will reset itself
■
once the display value is once
more within the permissible limits.
GB
19