6 Cleaning and maintenance
1. THE METER MUST BE DRY. Wipe the
dampened meter.
2. THE METER MUST BE USED AND STORED
IN
NORMAL
temperatures may shorten the life of electronic
components and distort or melt plastic parts.
3. THE
CAREFULLY AND GENTLY. Dropping the
meter may damage its electronic elements or
the housing.
4. THE METER MUST BE KEPT CLEAN. From
time to time wipe the housing with a damp
cloth. DO NOT use chemicals, solvents or
detergents.
5. USE
RECOMMENDED SIZE AND TYPE. Remove
the old or discharged batteries from the meter
to avoid leakage and damage.
6. IF THE METER IS TO BE STORED FOR
LONGER THAN 60 DAYS, remove the
batteries and keep them separately.
The electronic system of the meter does not
require maintenance.
During the storage of the device, the following rec-
ommendations must be observed:
protect the probes with a protective case,
make sure that the meter and accessories are dry,
when the devices must be stored for prolonged
period of time, batteries must be removed from
the device.
8 Dismantling and disposal
Worn-out electric and electronic equipment should
be gathered selectively, i.e. it must not be placed
with waste of another kind.
Worn-out electronic equipment should be sent to a
collection point in accordance with the law of
waste electrical and electronic equipment.
Before the equipment is sent to a collection point,
do not dismantle any elements.
Observe the local regulations concerning disposal
of packages and used batteries.
TEMPERATURES.
METER
ONLY
7 Storage
MIC-5 – USER MANUAL
MUST
NEW
BATTERIES
Extreme
BE
HANDLED
OF
29