geberit SIGMA10 Manual De Instrucciones página 13

Operation
Geberit Apps
Various Geberit apps are available for operation, settings and maintenance. The apps commu-
nicate with the device via a Bluetooth® interface.
The Geberit apps are available free of charge for Android and iOS smartphones in the
respective App Stores.
Establish connection with device
▶
Scan the QR code and follow the
instructions on the landing page.
Actuate manual flush
A manual flush is actuated by holding your
hand in front of the infrared sensor.
▶
Hold your hand approx. 15 cm in
front of the actuator plate. There is
no need to touch the actuator plate.
Place your hand in the detection
range for approx. 0.5–1 second for a
full flush and for approx.
1–2 seconds for a partial flush.
9729387019 © 02-2022
970.766.00.0(00)
For testing purposes, a flush can also be
actuated with a Geberit app.
Actuate automatic flush
An automatic flush is actuated by stepping
away from the WC.
▶
Leave the user detection range.
The automatic flush actuation is activated
ex works. It can be deactivated at any time
with a Geberit app.
EN
13