Maintenance Regulations - geberit SIGMA10 Manual De Instrucciones

Maintenance

Maintenance regulations

For Geberit WC flush controls with battery
operation, the batteries must be replaced
after approx. 2 years.
Replace the batteries
Prerequisite
– 2 replacement batteries (type 1.5 V
mono/D/LR20/AM-1, recommendation:
Varta Industrial or Panasonic
Powerline) are available.
– WC lid is closed.
Loosen any screws that may be
present on both sides of the actuator
plate.
1
Demount the actuator plate.
9729387019 © 02-2022
970.766.00.0(00)
2
Disconnect the power supply cable
from the flush control.
3
Remove the battery compartment
cover.
4
Take the batteries out and dispose
of them appropriately.
EN
15