Lomography LOMOGRAFLOK 4X5 Instant Back Manual página 9

trouBlEshooting
Q: The LomoGraflok is functioning but the film does not eject after
the Film Ejection Button [ 2 ] is pressed.
A: Please check the following:
• Make sure that there is film installed in the camera.
Check the Film Counter Window [ 8 ] to see if your film has
•
come to an end.
• Make sure the LomoGraflok is not set to "Off".
• Check the battery power by checking the battery light inside
the Film Counter Window [ 8 ] . If it is not lit up, that means
your camera is running out of battery. You should insert fresh
batteries.
Q: I focused on the ground glass well but the photo is out of focus.
A: Make sure the Film Plane Calibration & Mask Attachment [ 1 3 ] is
installed correctly while focusing and the LomoGraflok is
installed correctly on the camera while shooting.
9