Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
B
Using the appliance
Parts to be used for door reverse
SN
part
Quantity
Pre-installed on refrigerator, removed and retained it
1
Upper hinge
1
when changing the door
Upper hinge
Pre-installed on refrigerator, removed and retained it
2
1
cover
when changing the door
Pre-installed on refrigerator, removed and retained it
3
Decorative cover
1
when changing the door
Door self-
Pre-installed on refrigerator, removed and retained it
4
2
locking
when changing the door
Pre-installed on the refrigerator and to be used when
5
Middle hinge
1
changing the door
Pre-installed on the refrigerator and to be used when
6
Decorative cover
1
changing the door
Pre-installed on the refrigerator and to be used when
7
Lower hinge
1
changing the door
Pre-installed on the refrigerator and to be used when
8
Levelling feet
1
changing the door
In the attached plastic bag, take them out for use
9
Left upper hinge
1
when door is reversed
Left upper hinge
In the attached plastic bag, take them out for use
10
1
cover
when door is reversed
Left door self-
In the attached plastic bag, take them out for use
11
2
locking
when door is reversed
Right plastic
In the attached plastic bag, take them out for use
12
1
cover
when door is reversed
10
Notes
EN
B
Using the appliance
1. Please power off this appliance before conduct this operation. Remove all food from door
shelves.
2. Remove the upper lefl hinge cover decorative cover, upper right hinge cover and upper
right hinge, and disconnect the right signal line (signal line terminal
the box body
upper hinge cover
decorative
cover
3. Remove the refrigerated door body (be careful not to lose small parts such as the shaft
sleeve and stop on the door);
Remove the middle hinge and remove the decorative cover of hinge hole on the other side.
decorative
cover
11
1
2
,
) at the top of
upper hinge
2
1
middle hinge
EN
Publicidad
Tabla de contenido
