VALBERG CNF 378 C X625C Instrucciones De Uso página 8

B
Using the appliance
4. Remove the freezing door body (be careful not to lose small parts such as the shaft sleeve
and stop on the door);
Remove the hinge and adjust the angle. Remove and install the lower hinge shaft to the other
side of the hinge, and install the modified lower hinge to the other side of the box.
5. Change the refrigerator doar:
1) Remove the cover plate of the upper end cover of the refrigeration doar and the lefl
decorative cover. lnstall the upper shaft sleeve and the signal line of the doar body to the
other side and cover the upper end cover plate. Take out the right decorative cover from the
accessory bag and install it to the other side of the upper end cover.
2) Remove the doar self-locking, doar stop and shaft sleeve of the refrigeration doar, take out
the lefl doar self-locking from the accessory bag, install it on the lefl side of the lower end
cover of the refrigeration doar, change the doar stop and shaft sleeve to the lefl side of the
lower end cover of the refrigeration doar.
12 EN
B
Using the appliance
6. Change the freezing doar:
1) Remove the shaft sleeve and cap of the upper end cover of the freezing doar and install
them at the lefl and right swap positions.
2) Remove the doar self-locking, doar stop and shaft sleeve of the freezing doar, take out the
lefl doar self-locking from the accessory bag, install it on the lefl side of the lower end cover
of the freezing doar, change the doar stop and shaft sleeve to the lefl side of the lower end
cover of the freezing doar.
7. lnstall the replaced freezing dooron the lower hinge, then install the middle hinge and
cover the hinge hole decorative cover.
13
decorative
cover
middle hinge
EN