WARNING - Precautions for scan operation
1. Do not place stickers or metal materials other than the authorized
nameplate to the bottom of the charging tool.
2. Wipe clean the wall scanner's bottom and wheels. Dirt such as
mud may degrade scan performance if they keep staying.
3. Measurements performed with the measuring device may not be
100% accurate.
4. Scan performance may be affected in an environment subjected to
strong electromagnetic waves, water or surface irregularities on
the wall, the wall's construction status such as the use of metallic
materials, nonuniform builds inside the wall structure, etc.
Even if the wall scanner indicates that there is no object, an object
may actually be buried, causing a danger for drilling and other
types of work.
5. Before working on the structure such as by cutting and drilling,
be sure to see architectural drawings and other information in
addition to the scan results of the wall scanner.
6. A great change in the ambient temperature during operation may
degrade scan performance.
7. Sufficient performance cannot be achieved at extremely high or
low temperatures.
8. The LCD panel of the product is not a touch panel. Do not push or
apply a strong force onto the LCD panel.
9. Handle the LCD panel, which is susceptible to scratches, with
care. It will be scratched if rubbed with a cloth when sand or dust
is on the surface.
16