Installing Or Removing Battery Cartridge - Makita DWD181 Manual De Instrucciones

Installing or Removing Battery Cartridge

• Always be sure that the tool is switched off and the battery cartridge is
removed before adjusting or checking function on the tool.
• Always switch off the tool before installing or removing of the battery
cartridge.
• Hold the tool and the battery cartridge firmly when installing or removing
battery cartridge. Failure to hold the tool and the battery cartridge firmly
may cause them to slip off your hands and result in damage to the tool
and battery cartridge and a personal injury.
3
To remove the battery cartridge, slide it from the tool while sliding the button
on the front of the cartridge.
To install the battery cartridge, align the tongue on the battery cartridge with
the groove in the housing and slip it into place. Insert it all the way until it locks
in place with a little click. If you can see the red indicator on the upper side of
the button, it is not locked completely.
• Always install the battery cartridge fully until the red indicator cannot be
seen. If not, it may accidentally fall out of the tool, causing injury to you
or someone around you.
• Do not install the battery cartridge forcibly. If the cartridge does not slide
in easily, it is not being inserted correctly.
CAUTION
1
2
1. Red-colored section
2. Button
3. Battery cartridge
CAUTION
24