Searching For Iron Bars In A Block Fence - Makita DWD181 Manual De Instrucciones

Operation

Searching for iron bars in a block fence

• Scan mode:Single Detection
• Scene:Radar View
Block fences
Block fences generally have a
structure as shown at right.
Iron bars are placed between blocks,
and mortar is filled around each iron
bar.
In this example, use the scene of "Radar View" to be able to detect both iron
bars and block voids.
1. Turn on the scanner.
If the scanner has already been switched on, press the mode button (
2. Select the scan mode of "Single
Detection" and press the apply
button ( ).
1
1. Iron bar
2. Block fence
1
4
1. Void
2. Mortar
3. Iron bar
4. Block
48
2
2 3
4 4
).