Laser Beam Related Safety Standards; Safety Declaration; Radio Standards - Makita DWD181 Manual De Instrucciones

Laser Beam Related Safety Standards

This product complies with the following standards:
• IEC 60825-1:2014
• FDA: Complies with 21 CFR 1040.10 and 1040.11 except for deviations
pursuant to Laser Notice No.50, dated June 24, 2007
LASER RADIATION
DO NOT STARE INTO BEAM
CLASS 1 LASER PRODUCT

Safety Declaration

This product complies with the following standards:
• IEC61010-1:2010 (3rd Edition) Safety requirements for electrical equipment
for measurement, control, and laboratory use
The usage conditions of this product for compliance with this standard are
as follows.
CAUTION
BL1815N/BL1820B/BL1830B/BL1840B/BL1850B/BL1860B battery
cartridge (This caution is an explanation for labels used on this
product.)
Use only the genuine Makita batteries listed above.
Use of non-genuine Makita batteries, or batteries that have been altered,
may result in the battery bursting causing fires personal injury and damage.
It will also void the Makita warranty for the Makita tool and charger.

Radio Standards

• FCC Part15 Subpart B: Federal Communications Commission (FCC),
Equipment authorization of unintentional radiators
• FCC Part15 Subpart F: Federal Communications Commissions (FCC),
Ultra-wideband Operations
• ICES003: Canada ICE regulations
• EN301489-1
• EN301489-33
• EN62311
• EN302066
- When installing the BL1415N/BL1430B/BL1460B/
6