Brizo MultiChoice T60P Serie Instrucciones De Montaje página 3

T60P_______
Register Online
www.brizo.com/customer-support/product-registration
To reference replacement parts and access additional
technical documents and product info, visit www.brizo.com
?
1-877-345-BRIZO (2749)
www.brizo.com/customer-support
Read all instructions prior to installation.
Failure to read these instructions prior to installation may result in personal
injury, property damage, or product failure. Manufacturer assumes no
responsibility for product failure due to improper installation.
You may need:
THIS VALVE MEETS OR EXCEEDS THE
FOLLOWING STANDARDS:
ASME A112.18.1/CSA B125.1 and ASSE 1016.
CAUTION: This system/device must be set by the
installer to ensure safe, maximum temperature.
Any change in the setting may raise the discharge
temperature above the limit considered safe and
may lead to hot water burns.
NOTICE TO INSTALLER: CAUTION!–As the
installer of this valve, it is your responsibility
to properly INSTALL and ADJUST this valve
per the instructions given. This valve does
not automatically adjust for inlet temperature
changes, therefore, someone must make the
necessary rotational limit stop adjustments at
the time of installation and further adjustments
may be necessary due to seasonal water
temperature change. YOU MUST inform the
owner/user of this requirement by following the
instructions. If you or the owner/user are unsure
how to properly make these adjustments, please
refer to the section "Adjusting the Rotational Limit
Stop". If still uncertain, call us at 1-877-345-BRIZO
(2749).
After installation and adjustment, you must affix
109507 Rev. B 04/19/2022
!
CAUTION
!
MultiChoice
Balance Valve Trim
your name, company name and the date you
adjusted the temperature knob to the caution label
provided and apply or attach the label to the back
side of the closest cabinet door and the warning
label to the water heater. Leave this Instruction
Sheet for the owner's/user's reference.
WARNING: This pressure-balanced valve is
designed to minimize the effects of outlet water
temperature changes due to inlet pressure
and temperature changes, commonly caused
by dishwashers, washing machines, toilets
and the like. There is a risk of hot water
burns and other personal injury when there
is a failure of other temperature controlling
devices elsewhere in the plumbing system if
the rotational limit stop is not properly set or if
the hot water temperature is changed after the
settings are made or if the water inlet changes
due to seasonal changes. To minimize this risk,
caution should be used when using the hot
water knob.
WARNING: Do not install a shut-off device on
either outlet of this valve. When this type of
device shuts off the water flow, it can defeat
the ability of the valve to balance the hot and
cold water pressures.
1
Pressure
®
109507 Rev. B