Kohler K-97630-NY Instrucciones De Instalación página 3

IMPORTANT! Leave this manual for the end user.
Read these instructions before installing or using this product.
The locker unit must only be trimmed in height. Do not cut down the sides.
Verify that the existing rough walls are within 3/8" (10 mm) of plumb.
The locker unit must be braced using 2x4's around the entire unit.
Use color matched silicone sealant around the locker unit.
Cover the shower base with a drop cloth or other protective material to avoid damage.
Follow the construction adhesive and 100% silicone sealant instructions for application and curing time.
Inspect all components for damage after unpacking, prior to installation.
A router may be used to cut the locker unit. The router bit will dull quickly.
1484883-2-A
Kohler Co. 3