Kohler K-97630-NY Instrucciones De Instalación página 7

4. Install the Locker Unit
IMPORTANT! The locker unit must be placed with the shelf grooves angled upward. If the locker unit is placed upside
down the shelves will fall out.
TIP: Urethane based adhesive may be more effective for locker unit adhesion.
Generously apply bath and shower construction adhesive to the back of the locker unit on the top, bottom, and sides.
Position the locker unit into place at a slight angle.
Push the locker unit against the installed wall panel and into the rough wall. Press firmly and evenly across the entire
locker unit.
Kohler Co.
Wallboard Backing
7
2x4 Blocking
1484883-2-A