Technical Specifications - cecotec BOLERO COOLMARKET 4D 454 INOX Manual De Instrucciones

ENGLISH
The interior temperature is too high
The interior temperature is too low
The doors cannot be easily open
There is water leaking
The light does not work.

9. TECHNICAL SPECIFICATIONS

You can access the product database where the information for this model is stored by
scanning the QR code (and the energy label as well).
Reference:
Model
QR code
Voltage
Rated frequency
84
02372
Bolero CoolMarket 4D 454 Inox
220-240V ~
50 Hz
You may have left the doors open too long or
opened them too often, an obstacle may have
kept them open, or the refrigerator may have
too little space on the sides, back and top.
Increase the temperature according to the
'Control panel' section.
Check if the refrigerator is tilted back 10 mm
to allow the doors to close on their own or if
there is something inside which prevents the
doors from closing.
The water tray (located at the bottom rear of
the refrigerator) may not be levelled properly,
or the drain line (located below the top of
the compressor tank) may not be positioned
properly to guide water into the water tray,
or the water line is blocked. You may need to
keep the refrigerator away from the wall to
check the tray and the line.
The light bulb is damaged.
The control system has turned off the lights
because the door was open for a long period
of time, close the door and open it again to
turn on the lights again.
02373
Bolero CoolMarket 4D 454 Dark