Maintenance - HTW SKADI EPI-11SKABLACK Manual De Usuario E Instalacion

E8
E9

8.0 MAINTENANCE

In order for the furnace to function properly, certain maintenance tasks must be
performed, which usually depends primarily on run time and fuel quality. Some of
them must be done every day, while others can only be done once in a season.
The user is responsible for performing cleaning and maintenance tasks, some of
which can be performed directly by the user. Other tasks must be requested from
the technical service department designated and authorized by the manufacturer or
distributor.
* ALL OPERATIONS MUST BE PERFORMED WHEN THE FURNACE IS
COMPLETELY COOLED.
*BEFORE MAKING ANY CLEANING OR MAINTENANCE, MAKE SURE THE
FURNACE IS DISCONNECTED FROM THE POWER SUPPLY.
8.1 .Table of maintenance
Then we describe a set of maintenance operations and the recommended frequency.
Keep in mind that the frequency of instructions for maintaining and collecting ash is
usually for burning high quality pellets which made of the pine wood, which may
need to be done more frequently depending on the quality of the fuel used.
Operation and operator
Cleaning fire box
( users )
Cleaning Heat exchanger
(users )
Cleaning ashtray
(users )
Cleaning the glass door
(users )
Deep cleaning of the combustion chamber
( Specialized Technical Service )
Cleaning of smoke chamber
( users )
Chimney cleaning (uninstallation)
(Specialized Technical Service )
Annual inspection
( Specialized Technical Service )
Electric supply error
Maintenance required
Voltage or frequency
error
Stove work over 900
hours
8-12
1 day
hours
X
X
27
Check the power
supply
Contact the local
distributor to reset the
working time
frecuencia
2-3 1
days month
X
X
X
1
season
X
X
X