Filling Chamber; Cleaning The Filling Chamber; Removing The Screen; Installing The Screen - Vapormed Mighty+ MEDIC Modo De Empleo

6.3 Filling Chamber

6.3.1 Cleaning the Filling Chamber

NOTICE
Material damage caused by improper cleaning
Penetration of isopropyl alcohol into the Vaporizer
• Do not moisten cotton swabs too much.
X Clean the Filling Chamber with a cotton swab soaked in isopropyl
alcohol.

6.3.2 Removing the Screen

X If a Screen is clogged, it must be replaced.
X Press in the Screen, using the Filling Chamber Tool along the groove of
the Filling Chamber.
Ö The Screen bulges and detaches from the groove.
X Clean the Screen with rinsing water or isopropyl alcohol.

6.3.3 Installing the Screen

X Arch the cleaned or new Screen.
X Insert the Screen into the Filling Chamber with the curved side facing up-
wards.
X Press the Screen flat into the provided groove with the aid of the Filling Cham-
ber Tool.

6.5 Cleaning the Vaporizer, the USB Charger and the USB-C Cable

NOTICE
Material damage caused by improper cleaning
Penetration of water into the Vaporizer, the USB Charger or the
USB-C Cable.
• Do not immerse in water or other liquids.
• Do not clean with direct water or steam jet or compressed air.
6 C L E A N I N G / H Y G I E N E
69