Infiniton 48YA3 Manual De Instrucciones página 44

6. Water Box Function
Steam note:
Press water box and
take it out , then take
out sealing gasket
and add water.
1) Use pure water with a TDS value greater than 3.
2)
Before steam cooking:
Before starting the steam cooking mode, if the tank is short of water, press
Note: Before starting the steam cooking mode, please clean the water tank .
3)
During steam cooking:
During steam cooking mode, if the tank is short of water,
After adding water, it can work normally.
4) After steam cooking:
1-After steam function is finished , the water in boiler will be withdraw to water tank. This
process lasts for about 1 minute.
2-During the process to withdraw the water back to water tank , if the water tank is full , the
system will be beeping 10 times to remind you clean up the tank. After the water tank is empty,
the system will continue to withdraw water.
Note: After steam cooking, please remove the water from water tank.
7. Auto Cook
1)
2)
Touch " " or "
menu. (A01 to A16)
3)
ote Cooking time or temperature can not be set in the Auto Cook.
1)
After steam auto menu, the water pump will withdraw the water back to water tank there
2)
will be some noise sound.
3) After steam auto menu, you need to clean the water on cavity and door panel.
Some menus include a Preheat function, where the screen displays "
4)
starts when the preheat temperature is reached. If the menu need preheating, don't put the
food in the oven during preheating. Only when the temperature is reached, then put the food
in and start cooking. D
" , or slide
,
, you can choose different types of cooking
key,
.
" and the timer