Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Fully insert the appliance and centre it.
Do not kink the connecting cable.
Screw the appliance into place.
The gap between the worktop and the appliance must not be closed by
additional battens.
Electrical connection with plug
The appliance is fitted with a plug and must only be connected to a properly installed earthed socket.Only a qualified electrician
who takes the appropriate regulations into account may install the socket or replace the connecting cable.If the plug is no longer
accessible following installation, an all-poleisolating switch must be present on the installation side with a contact gap of at least
3 mm. Contact protection must be ensured by the installation.
Fuse protection: see instructions for use-technical data.
Electrical connection without plug
6
5
<
10
11
Publicidad
Tabla de contenido
