Installation Instructions - HOMCOM 820-338V90 Instrucciones De Instalación

Installation Instructions

● Before installing, check that all parts are complete and the product is intact.
● If you want to use the electric heater freestanding, please fit with the feet provided with
the heater, following the instructions below. Make sure the heater is mounted on a level,
stable and clean surface.
Freestanding Installation
1. Put the product upside down on a soft
cotton cloth or carpet.
2. Fix the feet to the base of the heater
using the screws provided. Line up the
holes in the base with the holes in feet,
put the screws through the holes and
tighten with a screwdriver.
Wall Mounted Installation
4 Hook Type Bracket
1. Take out 4 brackets, 6 expansion screws and 6 screws out from the box, and fix 2
brackets onto the wall according to the distances between holes of the bracket, as
depicted in the picture below.
mounting hole for 2000W
450
30
50