EGAmaster 66267 Manual De Instrucciones página 14

2. When you use the indicator, sometimes the LCD appears "ERR" but disappear at once
because of a temporary error caused due to extremely quick displacement of the spindle.
Keep on using the indicator, since there is no effect on measurement.
Although you own the high-quality product, like any other electronic product, appropriate
attention is necessary,
avoid the product contact with liquid, exposure in sunshine, do not disassemble or collide the
product.
As the measuring tool and Bluetooth device (PC, mobile etc.) used for the first time, it needs
to pair each other, the operation method as following:Open the Bluetooth seeking function of the
device(PC, mobile etc.),then press the DATA button of measuring tool and keep over 3 seconds,
until the blue LED blinks quickly(approx 1 second per time),that meaning is the measuring tool
can be found by the receiving device, then relax the DATA button, waiting for "Bluetooth Key-
board" symbol shows on the receiving device, and then click "Pair", the receiving device and the
measuring tool will be connected
After the connecting successful, blue LED will blink slowly(1 second on and then 5 seconds
off, once by once...).If the pairing is unable to connect successful in 5 minutes, the measuring
tool will quit pairing mode automatic. Still needs to continue to pair, please repeat the previous
operation.
For the difference OS, it may support multiple Bluetooth keyboard at the same time, such as
windows (7 or above) IOS, after connecting successful, system will appear multiple Bluetooth
keyboard icon or symbol, shows as below: for example by Windows (7 or above ) OS
After the connecting successful, short press the DATA button and relax, the measuring tool
will send data to receiving device(PC, mobile etc.),and the blue LED will blink twice quickly to
alert user that data has been sent out. For example by Windows OS
Activate the interface of office program
To be explained is, using multiple Bluetooth Keyboard collect data in IOS at the same time,
it will happen to switch slowly between each Bluetooth keyboard automaticly than Windows OS,
(caused to press the data button, the data send failure, and need to try to press the data button
again to send data), it may be difference between Windows OS and IOS.
Notice:
a. During pairing between the receiving device and the measuring tool, be careful to keep
them closely.
b. For windows 7 and previous versions of the operating system, before pairing, please con-
firm that if installed the operating system for the Bluetooth adapter, if not installed, may not be
paired. It can be matched directly for windows version 8 and above without installing Driver.
c. When the time is less then 2 seconds between twice sending, it will happen to lose the
data.
14