Temperature Control - universalblue UBF2206-20 Manual De Instrucciones

• A short buzz will be activated everytime a button is pressed
effectively.
• If appliance is not bein used or the door has been closed over
1 min, display enters screen saver mode. Once the door is
opened again or any button is press in the display, light will
be up again.

TEMPERATURE CONTROL

This appliance has electronic temperature control for both,
refrigerator and freezer part.
When appliance is used for first time, it is recommended to select
the temperature at 5ºC for the refrigerator and -20ºC for the freezer.
If you wish to change the temperature, follow below instructions.
Changing refrigerator's temperature:
Please, note
temperature will be updated in all the cabinet, as the adjustment is
static.
If you wish to change the temperature, press "Fridge" button (num.2
above image). Fridge's temperature indicator lights will be up on the
display. (num. 1 in the image above).
Press the button as many times as necessary until the number that
you want is illuminated.
After 5 seconds the light stops flashing and the temperature has
been established.
Changing freezer's temperature:
Please, note
temperature will be updated in all the cabinet, as the adjustment is
static.
that changing
2℃ 3℃
that changing
refrigerator's
4℃ 6℃
refrigerator's
temperature,
8℃
temperature,
the
the
36