Operation; Auto Mode; Fan Speed Button - Sharp KCP110UW Manual De Operación

OPERATION

START/STOP
START
♪
NOTE
• Unless the power plug has been unplugged,
the operation will Auto Resume in the previous
mode it was operating in. (However, in the
case of Plasmacluster Express Clean mode,
the operation will resume to the mode before
Plasmacluster Express Clean mode and
settings.)
Example: if the power is lost during operation,
the operation will resume to previous operation
mode and settings if power is restored.

AUTO MODE

The fan speed is automatically controlled depending
on the six detections. (PM2.5 / Usual dust / Odor /
Temperature / Humidity / Light)
STOP
♪
～
♪
EN-16

FAN SPEED BUTTON

ADDITIONAL FAN SPEED
FUNCTIONS: APP ONLY
POLLEN:
The dust sensor sensitivity is automatically
increased and the dust sensor quickly detects
impurities such as dust and pollen and cleans the
air powerfully.
SLEEP:
The product will operate quietly, and the fan speed
will automatically switch depending on the amount
of impurities in the air and room brightness.
When the Light Control is set to "Auto", the Display
and Air Quality Indicator will automatically switch
Dim or OFF based on room brightness.
Room is bright: Light is dimmed
Room is dark: Light is OFF
PLASMACLUSTER EXPRESS
CLEAN MODE:
The product releases Plasamcluster ions at max
air flow for 10 minutes. After that, the air purifier
operates for 50 minutes on high fan speed.
NOTE
• When the operation finishes after 60 minutes,
the product will return to the prior operation
mode.
It is able to change to other modes during this
operation.
• The Plasmacluster ion cannot be turned "OFF".
♪ ♪
LOW
♪
MED
♪
MAX