Battery Charge Level Indicator; Charging The Battery Pack - Powersmart DB2805RB Manual Del Usuario

To Clear the Chute
1. Shut the motor and auger off!
2. Remove the battery pack from the snow blower.
3. Wait 10 seconds to be sure the auger has stopped rotating.
4. Always use a clean-out tool, such as a wood rod or other clearing tools that are commercially
available; do not use your hand.

Battery Charge Level Indicator

The battery pack are equipped with a push button for checking the charge level. Simply press the push
button to read off the battery charge level from the LED of the battery indicator:
Lights
1 Light On
2 Lights On
3 Lights On
4 Lights On
NOTE: If the charge level button does not appear to be working, place the battery pack on the charger
and charge as needed.

Charging the Battery Pack

1. Pull the lock button on the battery to pull the battery pack out of the equipment.
2. Insert the charger's plug into the electrical wall
outlet.
3. Place the battery pack into the charger by sliding
the pack as shown to lock it into position.
4. When charging is complete, remove the battery
from the charger by pulling the push lock button.
Light Indicators
The battery is at 25% capacity and requires charging.
The battery is at 50% capacity and requires charging soon.
The battery is at 75% capacity.
The battery is at full capacity.
12