Transport; Storage; Frost Protection - Kärcher K 3 Power Control Manual

Transport

CAUTION
Failure to observe the weight
Risk of injury and damage
Be aware of the weight of the device
during transportation.
Carrying the device
1. Lift the device by the carrying handle
and carry it.
Pulling the device
1. Pull out the transport handle until it
audibly engages.
2. Pull the device by the transport han-
dle.
Transporting the device
in a vehicle
1. Drain the detergent tank.
2. Secure the device against shifting
and tipping.
14
CAUTION
Failure to observe the weight
Risk of injury and damage
Be aware of the weight of the device
during storage.
Storing the device
1. Place the device on a level surface.
2. Disconnect the spray lance from the
high-pressure gun.
3. Press the separation button on the
high-pressure gun and disconnect
the high-pressure hose from the
high-pressure gun.
4. Disconnect the high-pressure hose
from the device.
5. Store the high-pressure hose on the
device.
6. Store the power-supply cord and ac-
cessories on the device.
Observe the additional notes before
storing the device for a long period of
time, see chapter Care and service.

Frost protection

ATTENTION
Danger of frost
Incompletely emptied devices can be
destroyed by frost.
Completely empty the device and ac-
cessories.
Do not store outdoors!
To avoid damage:
The following requirements must be satisfied:
● The device is disconnected from the
water supply.
● The high-pressure hose is removed.
1. Switch the device on "I/ON".
2. Wait for a maximum of 1 minute un-
til no more water escapes from the
high-pressure connection.
3. Switch off the device.
4. Store the device together with all ac-
cessories in a frost-save room.
English

Storage