Interrupting Operation; Finishing Operation; Transport - Kärcher K 4 Power Control Manual De Instrucciones

Recommended cleaning method
1. Spray the detergent sparingly on the
dry surface and let it work for a while
(do not let it dry).
2. Rinse off the loosened dirt with the
high-pressure jet.
After operation with detergent
1. Pull the Plug 'n' Clean detergent bot-
tle out of the holder and close it with
the lid.
2. For storage, place the detergent
bottle in the holder with the lid facing
upwards.
3. Rinse the device with clean water for
about 30 seconds.

Interrupting operation

1. Release the lever of the high-pres-
sure gun.
When the lever is released, the de-
vice switches off. The high-pressure
in the system is maintained.
2. Lock the lever of the high-pressure
gun.
3. Set the high-pressure gun with the
spray lance in the parking position.
4. For work breaks longer than 5 min-
utes, switch off the device "0/OFF".

Finishing operation

CAUTION
Pressure in the system
Injuries due to uncontrolled water es-
caping under high pressure
Only disconnect the high-pressure
hose from the high-pressure gun or the
device if there is no pressure in the
system.
1. Release the lever of the high-pres-
sure gun.
2. Close the water tap.
3. Press the lever of the high-pressure
gun for 30 seconds.
The pressure still remaining in the
system is released.
4. Release the lever of the high-pres-
sure gun.
5. Lock the lever of the high-pressure
gun.
6. Disconnect the device from the wa-
ter supply.
7. Switch off the device "0/OFF".
8. Pull the mains plug out of the outlet.
CAUTION
Failure to observe the weight
Risk of injury and damage
Be aware of the weight of the device
during transportation.
Carrying the device
1. Lift up the device by the carrying
handles and carry it.
Pulling device
1. Pull out the transport handle until it
audibly engages.
2. Pull the device by the transport han-
dle.
Transporting the device in a
1. Before horizontal transport, pull the
Plug 'n' Clean detergent bottle out of
the holder and close it with the lid.
2. Secure the device against shifting
and tipping.
English

Transport

vehicle
13