Insignia NS-PDP42-09 Guia Del Usuario página 16

Setting up your TV for a PC video source
To select the screen resolution:
1 Press MENU, then press
PICTURE.
2 Press ENTER. The PICTURE menu opens.
3 Press or
then press ENTER. The SCREEN menu
opens.
4 Press or
press ENTER.
5 Press or
want, then press ENTER.
You can also adjust the position, phase, and
size, or resetting the settings.
To use Auto Configure to adjust picture
position and minimize instability:
1 Press MENU, then press
PICTURE.
2 Press ENTER. The PICTURE menu opens.
16
or to select
to select SCREEN (RGB-PC),
to select Resolution, then
to select the resolution you
or to select
www.insignia-products.com
Insignia NS-PDP42/50-09 Plasma TVs
3 Press or to select SCREEN (RGB-PC),
then press ENTER. The SCREEN menu
opens.
4 Press or to select Auto config., then
press ENTER.
5 Press or to select YES, then press
ENTER. Auto configuration begins.
If the position of the image is still not correct,
try Auto configuration again. If that does not
work, you can manually adjust the position,
size, or phase. This feature only works in
RGB-PC mode.
To adjust the position, size or phase:
1 Press MENU, then press
PICTURE.
2 Press ENTER. The PICTURE menu opens.
3 Press or to select SCREEN (RGB-PC),
then press ENTER. The SCREEN menu
opens.
4 Press or to select the following:
• Position—Use this to adjust the picture
left/right and up/down.
• Size—Use this to minimize any vertical
bars or stripes visible on the screen
background. The horizontal screen size
also changes. The size adjustment range
is -30 ~ 30.
or to select